ECThe M engine control module is usually installed in a protective box in the engine compartment. It is a small computer composed of chips, capacitors, resistors, circuit boards and other components.
There is no picture. The engine control module of Buick Regal is in the engine compartment, which is the control center of the engine control system. The engine control module can provide 5V or 12V voltage to each sensor or switch, which is achieved by adjusting the feedback resistance of the power supply inside the engine control module.
The start relay is in the fuse box, the control module is the old ECM in the empty filter shell, and the new model is on the side of the left battery.
is the engine control main relay. The main function of ECM-MAIN is to supply power to the engine computer and control the functions of the engine computer.
I. ECM is an automobile engine control module and a core component of engine control. According to the input information of each sensor, it controls the fuel injection and ignition moment of the engine and provides the best control instructions for other output devices.
The reason for the failure of Dongfeng Tianlong truck EECU: the connectors of the CAN bus have virtual connection, the normal power supply connector, the virtual connection switch power supply circuit; through troubleshooting, it is found that the shutdown switch harness connector has water (close to the front wheel), and the contact needle corrosion; elimination method: rust removal through the contact needle, prevention After rust treatment, reconnect the troubleshooting.
EFI main relay is the main relay that supplies power to ECM, fuel vacuum switch valve, etc. Generally, the relay box on the side of the engine is located in the fuse box. It is a round iron shell with a connecting coil in the shell (as shown in the figure). Function: The main relay is controlled by KEY and is responsible for controlling the power supply of ECU and EFI systems.
The output insurance of the ecm main relay often bursts due to a short circuit in the line. Ecm masterThe relay output fuse often bursts and the line needs to be checked. The engine control harness ecu control line and the line next to the co-driver's debris box can be re-pulled to restart the vehicle. If the vehicle is no longer turned off, the fuse is normal, it can be used temporarily.
1. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit.
2. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit. The reasons for this kind of failure are the failure of the electric version of the engine or the problem of the relevant line.
3. Reason, for reference only: sensor damage, poor contact or signal interruption; poor engine maintenance; poor quality of fuel and oil; insufficient combustion of mixed gas; spark plug failure, ignition coil failure; fuel pump failure, oil line blockage; air conditioning filter element blockage.
The engine control module of Chevrolet Cruze is on the right side of the gearbox. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engine (resurrected plug engine), external combustion engine (Sterling engine, steam engine, etc.), jet engine, motor, etc.
The engine adjustment module of the Chevrolet Cruze is located on the right side of the gearbox.An engine is a machine that can convert other forms of energy into mechanical energy. Including internal combustion engine (resurrected plug engine), external combustion engine (String engine, steam engine, etc.), jet engine, motor, etc.
The engine control module of the Chevrolet Cruze is located on the right side of the gear box.
1. ECM (Engine Control Module) controls the operation of the entire engine just like the soul of the engine.
2. The main meaning of automobile ecm is as follows: the engine electronic control module (ECM for short) has the function of continuously monitoring and controlling the normal operation of the engine;In the modern engine management system, ECM is its core control.
3. The ECM on the vehicle refers to the Electronic Control Module of the vehicle, also known as the Engine Control Module. ECM is a small computer located in the engine compartment of the vehicle to monitor and control the operation of the engine.
UEFA Europa League-APP, download it now, new users will receive a novice gift pack.
ECThe M engine control module is usually installed in a protective box in the engine compartment. It is a small computer composed of chips, capacitors, resistors, circuit boards and other components.
There is no picture. The engine control module of Buick Regal is in the engine compartment, which is the control center of the engine control system. The engine control module can provide 5V or 12V voltage to each sensor or switch, which is achieved by adjusting the feedback resistance of the power supply inside the engine control module.
The start relay is in the fuse box, the control module is the old ECM in the empty filter shell, and the new model is on the side of the left battery.
is the engine control main relay. The main function of ECM-MAIN is to supply power to the engine computer and control the functions of the engine computer.
I. ECM is an automobile engine control module and a core component of engine control. According to the input information of each sensor, it controls the fuel injection and ignition moment of the engine and provides the best control instructions for other output devices.
The reason for the failure of Dongfeng Tianlong truck EECU: the connectors of the CAN bus have virtual connection, the normal power supply connector, the virtual connection switch power supply circuit; through troubleshooting, it is found that the shutdown switch harness connector has water (close to the front wheel), and the contact needle corrosion; elimination method: rust removal through the contact needle, prevention After rust treatment, reconnect the troubleshooting.
EFI main relay is the main relay that supplies power to ECM, fuel vacuum switch valve, etc. Generally, the relay box on the side of the engine is located in the fuse box. It is a round iron shell with a connecting coil in the shell (as shown in the figure). Function: The main relay is controlled by KEY and is responsible for controlling the power supply of ECU and EFI systems.
The output insurance of the ecm main relay often bursts due to a short circuit in the line. Ecm masterThe relay output fuse often bursts and the line needs to be checked. The engine control harness ecu control line and the line next to the co-driver's debris box can be re-pulled to restart the vehicle. If the vehicle is no longer turned off, the fuse is normal, it can be used temporarily.
1. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit.
2. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit. The reasons for this kind of failure are the failure of the electric version of the engine or the problem of the relevant line.
3. Reason, for reference only: sensor damage, poor contact or signal interruption; poor engine maintenance; poor quality of fuel and oil; insufficient combustion of mixed gas; spark plug failure, ignition coil failure; fuel pump failure, oil line blockage; air conditioning filter element blockage.
The engine control module of Chevrolet Cruze is on the right side of the gearbox. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engine (resurrected plug engine), external combustion engine (Sterling engine, steam engine, etc.), jet engine, motor, etc.
The engine adjustment module of the Chevrolet Cruze is located on the right side of the gearbox.An engine is a machine that can convert other forms of energy into mechanical energy. Including internal combustion engine (resurrected plug engine), external combustion engine (String engine, steam engine, etc.), jet engine, motor, etc.
The engine control module of the Chevrolet Cruze is located on the right side of the gear box.
1. ECM (Engine Control Module) controls the operation of the entire engine just like the soul of the engine.
2. The main meaning of automobile ecm is as follows: the engine electronic control module (ECM for short) has the function of continuously monitoring and controlling the normal operation of the engine;In the modern engine management system, ECM is its core control.
3. The ECM on the vehicle refers to the Electronic Control Module of the vehicle, also known as the Engine Control Module. ECM is a small computer located in the engine compartment of the vehicle to monitor and control the operation of the engine.
641.49MB
Check321.91MB
Check567.28MB
Check164.27MB
Check961.29MB
Check813.44MB
Check497.94MB
Check445.94MB
Check622.85MB
Check255.48MB
Check279.52MB
Check818.52MB
Check483.97MB
Check213.73MB
Check246.89MB
Check419.44MB
Check777.25MB
Check698.65MB
Check417.54MB
Check468.66MB
Check296.95MB
Check589.89MB
Check298.63MB
Check539.89MB
Check753.58MB
Check832.82MB
Check995.22MB
Check834.71MB
Check551.73MB
Check752.98MB
Check734.96MB
Check642.52MB
Check739.98MB
Check585.23MB
Check753.35MB
Check256.28MB
CheckScan to install
UEFA Europa League to discover more
Netizen comments More
425 Bingo Plus
2025-02-23 00:36 recommend
1355 UEFA Champions League live streaming app
2025-02-22 23:34 recommend
2133 PAGCOR online casino free 100
2025-02-22 23:34 recommend
1733 Casino redeem
2025-02-22 23:25 recommend
1910 Europa League app
2025-02-22 22:35 recommend